高端电压小电流量检测仪（耐电弧放电检测仪）-（运算机保持）

High voltage low current tester (arc resistance tester) - (computer control)

好产命名称：耐电弧试验机

Product name: electric arc resistance tester

物料形号：NDH-A

Product model: NDH - A

考虑标准规定：GB/T 1411-2002《气体绝缘电阻的原材料耐高低平电流量焊弧电池充电的耐压》（等一起IEC  61621-1997）及ASTM D495等标准规范的请求设汁生产制造的，并适用IEC 149、UL 746A等试验报告最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

基本实用区间及性能：

本实验机是依照运用来电机马达、电嚣和家庭工程用电嚣等制造业的安装电工用塑胶片件、环氧树脂产品胶和耐压漆等耐压产品的耐电弧焊接放电机械稳定性评审，主用来固状耐压产品如：塑胶片件、塑料薄膜、环氧树脂产品、黑云母、陶瓷图片、窗玻璃、耐压油、耐压漆、瓦楞纸板等媒质的耐电弧焊接放电机械稳定性考试；

本疲劳压力试验机由计算出来机管理作业，会呈现某个进行實驗模式及进行實驗时刻，进行實驗收场后并保管某个进行實驗数据文件，并可打印纸.标淮实践意见书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为内外一体式架构，下边为的操作系統，上端为耐压环境试验箱。

2 本商品分为*新智慧掌握技术水平，经过选定应用程序（IEC或ASTM）可定时参与耐压，并在手提手机上提示实验设计的过程 和最终。

3 **性能参数优质，抗干拢程度强，检查要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时期计算误差：超过 ±10ms

2 调压器余量：2kVA

3 额定值试验装置电压电流：12.5kV

4 耐压输出功率导致精度：±3%

5 电流量操控gps精度：±10%  电流大小测试精度等级：1.5%

6 金属电极对制样学习压力：（0.5±0.05）N

7 工业素材：钨棒

8 探针长度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 的使用区域温度湿度：（23±2）℃

10 运用周围环境对湿度的：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 冲击试验    步骤：   国家标准下载/美标/10 mA 连着/20 mA 联续/30 mA联续/40 mA重复

13 耐压试验程度内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 品牌型号：

NDH-A    耐弧光冲击试验仪-微机调整

NDH-B    耐电弧放电试验台仪-触屏屏管控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！